Yeshvanth Muniraj
Published

Sine Wave Generation using IC 555 and LPF

Analysis using Red Pitaya STEMlab 125-10 Starter Kit

BeginnerProtip1 hour79
Sine Wave Generation using IC 555 and LPF

Things used in this project

Hardware components

STEMLab 125-10
Red Pitaya STEMLab 125-10
×1
SMA to BNC Converter
×2
BNC Oscilloscope x1/x10 Probes (Pair)
Digilent BNC Oscilloscope x1/x10 Probes (Pair)
×2
555 Timers
555 Timers
×1
Resistor 100k ohm
Resistor 100k ohm
×4
Through Hole Resistor, 68 kohm
Through Hole Resistor, 68 kohm
×1
Through Hole Resistor, 3.3 kohm
Through Hole Resistor, 3.3 kohm
×1
Capacitor 100 nF
Capacitor 100 nF
×1
Capacitor 10 nF
Capacitor 10 nF
×5
9V battery (generic)
9V battery (generic)
×1
9V Battery Clip
9V Battery Clip
×1
Breadboard (generic)
Breadboard (generic)
×1
Ethernet Cable, Cat5e
Ethernet Cable, Cat5e
×1

Story

Read more

Credits

Yeshvanth Muniraj

Yeshvanth Muniraj

23 projects • 15 followers
Hands-on experience in Embedded Systems and IoT. Good knowledge of FPGAs and Microcontrollers.

Comments

Add projectSign up / Login