This study is an example how to build a 3-phases 230V/380V from a 12-24V DC with an Arduino Uno
Universal access prosthesis
Touchless door handle mechanism that can be used in every door just replacing the standard handle. Very useful for people with disabilities.
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Are you away from home for vacation? Do you forget to water your plants? MarCas Tech offers a plant / soil irrigation system programmed.
A device that controls the customer population remotely, to reduce the spread of Covid-19.
Sketch to use a KY-022 + Arduino Mega for receiving data sent from an universal IR remote
Raspberry Pi can be a good environmental monitor and can forbid you to drive if you're drunk.
Minimalist cars race with a strip of smart LEDs and two switches.This project has evolved and now has its own website: www.openledrace.com
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
CHILLY is a small device who turns your evaporative Cooler into a smart cooler which can be controlled by your mobile phone!
In the second part of the tutorial, we learn how to read audio files from an SD card and output them on a speaker.
Are you tired of giving any surplus of your homemade electricity to your electric grid provider? Here is the solution to stop the waste!
To charge mobile battery with in specified amount of time by setting timer.
Use this project to get started on your first Pynq design using the Pmod Hygro to monitor the temperature and humidity of your environment!
A DIY home-made giant 10 x 10 LED board, it's bright, colourful and cool.
Let´s take a look into the I2S specification and let us try to realize the first step to play audio files with an FPGA.
Prevention of solar radiation in schools
This device works in Long Range Mode (LRM) using a special encoding technique for more information see the Actuator or TRX Unit technical do
Motor driver circuit with some power saving features.
Yet another Thomas Helmet made from a 3d printer with Attiny85 to control the RGB LED lights.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Builds on the project Mini But Mightyu, the MiniZed and Vitis for Motor Control using the built in accelerometer to control the speed.
Anitrack is an autonomous system that can track an animal's position, measure its temperature, its heart rate and its movements.