In this project I use addressable RGB LEDs to make a linear clock. The clock will be connected to Google Calendar to show my appointments.
Just a simple, fun Candy Dispenser using Arduino, a 3D Printer, and tape.
Interactive snake enclosure that is temperature and humidity controlled and uses lat-long to mimic natural light cycles, with an online cam.
Autonomous car, built from a LEGO frame, which responds to nearby objects and can also be manually controlled via remote control.
This project aims to implement interesting methods of driving an RC car right from your phone!
A 5-axis robot, all 3D-printed, with an Arduino Nano and miniSD card. Path programming and control by IR remote.
For industries that produce switches and socket and there would be a need to test the mechanical durability and electrical durability.
Motors, LEDs, and Christmas trees. Make your very own electronic zoetrope and hang it on your tree.
Line following robot car that changes the color line it follows based on a trigger shown in front of the car.
We developed a glove with an inertial measurement unit (IMU) sensor attached to control a wheeled robot using MSP 430 and myRIO board.
MoveThisWay is an autonomous robot that transports heavy payloads on programmable paths with obstacle detection capability.
Design of an Indicative Featured and Speed Controlled Obstacle Avoiding Robot.
A scrolling text display, using 294 LEDs to simulate a stock exchange ticker.
A smart city is an urban area that uses different types of electronic data collection sensors to supply information used to manage assets.
This project is a plant watering system.
This project fixed my problems with hot and cold rooms and logs details about how it was done, to compare to my ecobee4 thermostat details.
Set up an RGB LED to phase through the colors of the rainbow, or use twist knobs to make a custom color.
Leveraging FPGA capabilities to design and to implement a Frequency Hopping Spread Spectrum (FHSS) System.
An Arduino-based robot drummer. It works with a transistor noise-generator and an arrangement of servos hitting a can and a pair of piezos.
An Arduino-based programmable light suit for dancers.
You want to attach the DigiSpark ATtiny85 to a tiny OLED (128x32 pixels) and make it use easily readable, huge fonts (16x32 pixels WxH)?
Managing address WS2812B strip with ESP8266 via the web interface.
A tiny telegraph that can write any text messages that look like a telegrammes. This project made of oak plywood.
A Cool Hand which can mimic the gestures of a Human hand.