Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
Make a Big LED clock with arduino and RTC module to make it as a Real Time Clock.
This is another one of my series of unusual clocks. The time is displayed on the WS2812 LED strip containing 34 LEDs
An alarm clock showing the Jewish (Hebrew) date, the Gregorian date, current time, time of nightfall, sunrise, etc
Implement a 4-channel TDC on Cmod A7 35 using MicroBlaze and SRAM with 30ps rms and measurement rate of 60MSa/s
A 3D printed clock driven by a single stepper motor using gears to separate hours, minutes and seconds.
This project uses an ultrasonic sensor to allow a "hand wave" (no touch!) to trigger a series of LED's and the Happy Birthday song twice
The goal of this project is to demonstrate the capability of HLS in designing a digital clock system.
A digital clock completely built from scratch without any coding or microcontroller. Just by using only 74xx and 40xx series digital IC.
In this project I use addressable RGB LEDs to make a linear clock. The clock will be connected to Google Calendar to show my appointments.
RGB LEDs triangular/hexagonal pixels matrix.
Interactive snake enclosure that is temperature and humidity controlled and uses lat-long to mimic natural light cycles, with an online cam.
This is a 7 Segments counter with arduino
A simple tutorial and setup for this multi-function module, with a built-in thermostat, humidity sensor, clock and alarm feature.
FPGA based binary clock, which uses GPS for the time reference.
The Convertible LED Matrix Clock is a new take on designing LED displays. Its design allows it to be converted into two different modes.
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Use an RGB matrix and a micro:bit to display the time with an awesome game of PONG. Made with love and TinyGo.
How to build an humidity and temperature meter with time display from an old voltage meter casing.
Remember the days when you would sit listening to WWV time signals on your shortwave radio (tick, tick, tick…At the tone, the time will be…)
This is a project that aims to build an RGB LED P6 panel based LED Clock using RPi Zero W and Electrodragon interface board.