This project uses an LCD screen and DHT22 to display temperature and humidity data, simultaneously collected from two different locations.
The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
Use your hand to control the height of a pixel, and then navigate through a map full of obstacles to avoid. Get to the end to win!
The Convertible LED Matrix Clock is a new take on designing LED displays. Its design allows it to be converted into two different modes.
An Arduino-based programmable light suit for dancers.
This tutorial shows how to use the data collected from LoRa nodes into beautiful graphs and visualization using Node-red and Grafana.
A simple tutorial and setup for this multi-function module, with a built-in thermostat, humidity sensor, clock and alarm feature.
Use an RGB matrix and a micro:bit to display the time with an awesome game of PONG. Made with love and TinyGo.
Interface a CMOS camera with a ZYNQ-7000 series FPGA SoC and output live video feed to a VGA screen.
Digitizing household mechanical switches with CoolMOS C7. `
I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.
By analyzing atmospheric values, this tiny unit can decide when to irrigate your garden if it is necessary.
A Radar that detects objects with the help of sound waves is going to be implemented. Radar screen will be created on a HDMI screen.
Monitoring digital circuits can be difficult at best. Sometimes it's nigh impossible. But the Digital Discovery makes it easier!
This project proposes the creation of a graphics library in order to generate and manipulate the graphic information only using VHDL.
Application notes for Pmod TMP2 and Arduino Uno. In this app, the ambient temperature is displayed on the serial monitor and serial LCD.
Application notes for Pmod CLS and Arduino Uno. In this app, the message sent from the serial monitor will be displayed on the Pmod LCD.
Application notes for Pmod SSD and Arduino Uno. In this app, Pmod SSD will be used as a counter that increments every second.
Application notes for Pmod OLEDrgb and Arduino Uno. In this app, we will setup a message to display in different sizes and colors.
Application notes for Pmod OLED and Arduino Uno. In this app, a cloud of points is displayed randomly, then a flashing message will appear.
Application notes for Pmod KYPD and Arduino Uno. In this app, the activation of a key on the Pmod KYPD will be shown on the serial display.
Application notes for Pmod CLP and Arduino Uno. In this app, the Pmod will be programmed to display text on the LCD.
Uses a gyroscope to display acceleration data in three axes on a 16x2 LCD display and through PWM on 4 RGB LEDs.