Creating custom applications is pretty straightforward in PetaLinux, but to debug them, Vitis comes into play.
This project demonstrates how easy you can use the DMMShield from Digilent with all Arduino boards.
See how to get the TE0711 SoM running on the TE0701 baseboard from Trenz Electronic.
Implement a 4-channel TDC on Cmod A7 35 using MicroBlaze and SRAM with 30ps rms and measurement rate of 60MSa/s
See how to get up and running with the new ADP3450 USB Oscilloscope to fulfill your bench top test equipment needs.
See how to integrate your custom FIR with Xilinx DSP IP such as their DDS Compiler IP.
In this project the ADP3450 Oscilloscope/Function Generator/Logic Analyzer has been used to analyze various signals.
Continuing with my simple FIR filter Verilog module, this project walks through how to rewrite HDL logic when setup timing violations occur.
This project walks through how to implement a simple FIR filter with pre-generated coefficients in Verilog.
Creating a PYNQ image for the MicroZed 7010/20 and IO Carrier Card. Signal processing with XADC.
Light up three different LEDs using pulse width modulation corresponding to different ranges of analog input voltages.
A digital clock completely built from scratch without any coding or microcontroller. Just by using only 74xx and 40xx series digital IC.
Zynq US+ is an heterogeneous device with different kind of devices inside. On this project I will show you how to use all of them together.
Application notes for Pmod MIC3 and Arduino Uno. In this app, the sound captured by the module is displayed in the serial plotter.
Using Eclypse Z7 to generate an FSK signal and Genesys ZU for implement a single tone detector algorithm executed in the RTU.
In this project a 32ord FIR filter is computed by C application from PetaLinux. Input and output filter signals are synthesized by ZMOD DAC.
Projectile speed measurement with arduino!
The application is used to detect and store the signals from a MeC (Microbial Electrolysis Cell for hydrogen production)
Using LINX toolkit in Labview
This GE project includes a fast and thorough tutorial on how to use ICStation's ICL8038 Signal Generator to output various signals.
A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!
Sense or generate change-of-state instances with the Analog Discovery 2's 16 channel I/O.
Use the Analog Discovery 2 network analyzer and Waveforms 2015 to get a better idea of how circuits responds to various types of inputs.
Use the Analog Discover 2 as an affordable, compact and lightweight oscilloscope.