Project with a social purpose to aid the visually impaired. The glasses can detect obstacles up to 4m away and are readjustable.
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely without taking
The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
The purpose of this project is to create a radio map of the disaster area using reception devices placed near the affected area.
Local area network traffic analyzer with parallel string matching.
This project aims to create transmission line between two links using FPGA cards and solve the synchronization problems with ADPLL.
Application notes for Pmod LS1 and Arduino Uno. The input voltage and output level of the comparator module is displayed in serial monitor.
In my project, I used LabVIEW to interface with 3 Pmod ENC's connected to a WF32 to control a LabVIEW project I made called LabForms.
This tutorial shows how to use the data collected from LoRa nodes into beautiful graphs and visualization using Node-red and Grafana.
This project demonstrates how easy you can use the DMMShield from Digilent with all Arduino boards.
Let's learn everything about SRAM memories writing a controller in Verilog.
Let's write an efficient SRAM controller in Verilog.
Application notes for Pmod SD and Arduino Uno. In this app, voltages applied to inputs A0 & A1 are stored in a file on the SD card.
Application notes for Pmod MIC3 and Arduino Uno. In this app, the sound captured by the module is displayed in the serial plotter.
Application notes for Pmod AD1 & Arduino Uno. In this app, the result of the A/D conversion of channel A0 displays on the serial monitor.
Application notes for Pmod ALS and Arduino Uno. In this app, the value of the amount of light is displayed on the serial monitor.
Application notes for Pmod DPG1 and Arduino Uno. In this app, the pressure will be displayed on the serial monitor.
Application notes for Pmod DHB1 and Arduino Uno. In this app, motor control is carried out using the serial monitor.
Application notes for Pmod HB3 and Arduino Uno. In this app, a motor will be controlled and the status displayed on the serial monitor.
Exploring the signals behind Arduino's Servo library, and characterizing a servo's response to pulse width.
Control an FPGA from the Linux OS. Dynamically reconfigure the FPGA from Linux user-space. Control custom hardware on the FPGA from Linux.
A discussion about digital sound synthesis.
Exploring pulse width modulation, pulse density modulation, and digital to analog conversion using the Analog Discovery 2 and Waveforms!
Learn about photoresistors and the process of characterizing their response to light intensity.
Or connect with your social account:
New here? Create an account