This project, known as Biotronics, was conceptualized to create synthetic species that look alive or with life and make them conscious.
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.
Minimalist cars race with a strip of smart LEDs and two switches.
How about a metronome that beeps and lights up? Why I think yes! Also same setup with separate code runs a Whack A Mole game!
Translate music to a dazzling light show with this customizable light controller project. Great for DJs, parties, and 1:1 shows!
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely without taking
Two wearable devices that become a fitness tracker using the NXP Rapid IoT prototyping kit, ESP8266 board and AWS. Alexa compatible!
Example of diy smart socket. This can be controlled by ESP8266 Home application. With this smart socket you can on/off any device in home.
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
Interface a CMOS camera with a ZYNQ-7000 series FPGA SoC and output live video feed to a VGA screen.
The Xilinx Pynq framework enables us to use Python and Jupyter notebooks with FPGA designs.
Project with a social purpose to aid the visually impaired. The glasses can detect obstacles up to 4m away and are readjustable.
It's a Morse code receiver base on processing the light signals.
Responds to sound or can be set on automatic, all by IR. Or switch. WS2812B VU Bar on Uno or Nano. CHECK MY OTHER VU PROJECTS.
Application notes for Pmod LS1 and Arduino Uno. The input voltage and output level of the comparator module is displayed in serial monitor.
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
A thermostat with an OLED capable of plugging into a USB port.
Controlling lights and CO2 admission to a aquarium. Sensor data is stored so it can be used for statistics.
Diversity Adaptive Obstacle Avoiding Robot
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
A robot capable of motion in response to our gestures.
Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
A low-cost way of controlling a model train layout using a mobile phone through DTMF.
Or connect with your social account:
New here? Create an account