Minimalistic Emergency ventilator with fine control over BPM, tidal volume and flow rate, with a digital interface.
An animated cube made with 512 RGB LEDs driven by an ATmega328.
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
RGB LEDs triangular/hexagonal pixels matrix.
I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.
Interface a CMOS camera with a ZYNQ-7000 series FPGA SoC and output live video feed to a VGA screen.
hii, friends I hope you all are fine today i'll show you how to Make TV Ambilight Using Arduino This is a very easy project.
You'll learn how to create an automation system to communicate 3 Arduinos via RS485.
You'll learn how to communicate two Arduinos via RS485.
This simple project uses Xilinx Vitis 2020.1 to run an up/down BCD counter on Basys-3 board.
Lets build a small cute 5*5 RGB LEDMATRIX
Application notes for Pmod OLED and Arduino Uno. In this app, a cloud of points is displayed randomly, then a flashing message will appear.
An Arduino-based programmable light suit for dancers.
The Convertible LED Matrix Clock is a new take on designing LED displays. Its design allows it to be converted into two different modes.
Nothing like a good old game of Tetris on overpowered hardware.
Learn to use Liquid Crystal Display with Arduino using a free Arduino Simulator 👍 No Hardware Necessary
A DIY home-made giant 10 x 10 LED board, it's bright, colourful and cool.
Application notes for Pmod OLEDrgb and Arduino Uno. In this app, we will setup a message to display in different sizes and colors.
Digitizing household mechanical switches with CoolMOS C7. `
SPI Interface code for Pmod ALS (8-bit ADC) in Verilog is implemented from scratch,and transmitted to 7-seg display on Basys3 FPGA board.
A digital thermometer built from scratch using Attiny85 and ds18b20 temperature sensor, which can run on a CR2032 over 130 days!
This tutorial shows how to use the data collected from LoRa nodes into beautiful graphs and visualization using Node-red and Grafana.
Use your hand to control the height of a pixel, and then navigate through a map full of obstacles to avoid. Get to the end to win!
I decided to build a laser gun to compete with my friends a little. As I decided I did.