A controller made with c++ and python
How to make a simple laser beam tracking system
Using a TI F28379D Launchpad and a plastic recorder we coded a robot to move. Using WiFi an ESP8266 sent the notes to LABView on a computer.
I made this project because it can shorten the time of garbage disposal to a temporary dump that is carried out by the cleaners on my campus
A robot with IR and UT sensors to wall follow is tailed by another robot using a USB camera with the help of two MyRios and TI C2000 chip.
Chsel is a robot car that searches for various fruits, collects them and delivers them to a home base.
This project uses a self balancing two-wheeled robot to navigate a user drawn path as well as dance using beat detection.
The balancing “Segbot” (mouse) receives commands wirelessly from LabView, to escape the deadly claws of the all-seeing robot cat.
A tone-detecting, line-following, break-dancing robot car!
Breanna Chan and Brenna Kelly's final project for ME 461
Emergêncy hospital Ventilator project to combat the COVID-19 Healy Crisis. Together we are stronger and together we will win💪 👉🌈.
An autonomous robot that line follows and moves 'snowballs' in its path out of the way and then continues lane following. Mimics a snowplow.
This machine, built around a MSP430G2ET, uses a DC motor to deal out a card when motion is detected within 4 inches of an ultrasonic sensor.
Not all imaging systems need to be expensive. Solutions can be created using cost optimized FPGA and CMOS image sensors directly.
Build your own line following robot (line follower) step by step easily by following this tutorial
MoveThisWay is an autonomous robot that transports heavy payloads on programmable paths with obstacle detection capability.
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
A machine that consists of a face mask sanitiser (using UV LEDs), an automatic hand sanitising machine and an ARM MCU that checks vitals.
Scan the leaves of a plant with an Arduino Nano 33 BLE Sense and train a model to detect if it's diseased.
A touch-free germs disinfecting device that can disinfect anything from masks, wallets to mobile phones, killing maximum germs using UV-C.
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.
Application notes for Pmod CMPS2 and Arduino Uno. The 3 components of the magnetic field, module, & angle are displayed in serial monitor
Full procedure with theory explaining the concept behind a line follower robot
Motor driver circuit with some power saving features.