A discussion about digital sound synthesis.
How to make a homemade electrocardiograph (ECG).
How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
Application notes for Pmod MIC3 and Arduino Uno. In this app, the sound captured by the module is displayed in the serial plotter.
This project demonstrates how easy you can use the DMMShield from Digilent with all Arduino boards.
Zynq US+ is an heterogeneous device with different kind of devices inside. On this project I will show you how to use all of them together.
This project will show how to use your OpenScope MZ in LabVIEW.
In this project a 32ord FIR filter is computed by C application from PetaLinux. Input and output filter signals are synthesized by ZMOD DAC.
In this tutorial, we will go over how to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW.
How to use the logic analyzer with a SPI demo on the Basys 3 as an example.
Use the Analog Discover 2 as an affordable, compact and lightweight oscilloscope.
Use the Analog Discovery 2 network analyzer and Waveforms 2015 to get a better idea of how circuits responds to various types of inputs.
Calibrate the Analog Discovery 2 so you can ensure you are making the most accurate measurements possible.
My unboxing experience of the Analog Discovery 2.
Pinpoint both internal and external trouble spots with the Analog Discovery 2's spectrum analyzer to improve the performance of your device
This exercise will show you how to use your Analog Discovery 2 to verify what the signal looks like from an Arduino PWM pin in LabVIEW.
A data logger is similar to an oscilloscope, but is used to register data over relatively long periods of time.
Build a small portable electronics lab with an Analog Discovery and an Orange Pi PC Plus
Using Eclypse Z7 to generate an FSK signal and Genesys ZU for implement a single tone detector algorithm executed in the RTU.
Bundle multiple tools together in one small package, including an adjustable power supply, with the Analog Discovery 2 and Waveforms 2015.
This exercise will show you how to use your OpenScope MZ to read the output of a first order RC circuit.
In this project the ADP3450 Oscilloscope/Function Generator/Logic Analyzer has been used to analyze various signals.
Characterizing button switching behavior is an important first step for developing effective debounce algorithms in your systems.
Sense or generate change-of-state instances with the Analog Discovery 2's 16 channel I/O.
