Minimalist cars race with a strip of smart LEDs and two switches.
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
Let's teach Neural Network how to do a job for us.
This revisionist's project examines the meanings of being ALIVE and being AWARE based on the Caveman in the Box Theory.
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Find the location of a device, using multiple DWM1000-ESP8266 pairs, and an FPGA.
How to make an easy CNC-plotter using Arduino.
Radio that works with analog signal is implemented digitally on FPGA via VHDL.
This project is meant to protect you from any thief who may try to hack the password to your system.
With this project ,we aim to create a way to play physical chess with someone even if that person is on the other side of the world.
We found an app that will check the weather and give you the best travel method to go to school or work.
Cutsie Whun is a tough and fast, RC-controlled, 2-wheeled balancing fun machine.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
HuGo is a humanoid robot, created by 3D printing technique, controlled by FPGA boards using sensors, actuated by servo motors.
Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.
Generate a sound described by Fourier Analysis coefficients. FPGA gives a possibility of generating complex sounds in real time.
This is a very simple way to control a 3-phase AC installation in a delta configuration.
An autonomous car able to drive along a lane and react to roadsigns, obstacles and smart RFID markers, powered by OpenCV and Embedded Linux.
TCP controlled camera keeps tracked object in center of video.
A Radar that detects objects with the help of sound waves is going to be implemented. Radar screen will be created on a HDMI screen.
This is a small bot which draws on a plane surface. It takes input as GCODE and draws that pattern on surface. there are no limits to canvas