This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Not all imaging systems need to be expensive. Solutions can be created using cost optimized FPGA and CMOS image sensors directly.
This project creates an FPGA-controlled hexapod robot which is capable of walking and navigating around its environment using sonar and IMU.
Robotics are at the leading edge of Industry 4.0, AI and the Edge revolution. Let's look at how we can create an FPGA-controlled robot arm.
This revisionist's project examines the meanings of being ALIVE and being AWARE based on the Caveman in the Box Theory.
Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.
Come forward to meet the speaking mailbox.
Landje Robot is an fully open source STEM robot. It deviates in two aspects from many other builds. See here where...
With this project ,we aim to create a way to play physical chess with someone even if that person is on the other side of the world.
A cheap DIY version of Nanoleaf RGB LIGHT with ATtiny85 and WS2812 RGB strip.
Using a IR proximity sensor and microcontroller to find the local values of 'g' and will plot a real time damping curve.
Cutsie Whun is a tough and fast, RC-controlled, 2-wheeled balancing fun machine.
HuGo is a humanoid robot, created by 3D printing technique, controlled by FPGA boards using sensors, actuated by servo motors.
Sensing, Connected Utility Transport Taxi for Level Environments (SCUTTLE) made for the Mechatronics Engineering Technology Program.
Building cleaner, greener and smarter cities with IOTA.
When my ultrasound sensor stopped working, I decided to improvise by making an obstacle avoidance bot using IR sensors (cheaper too).
Learn how to make you air conditioner smart by allowing it to be controlled by your phone from anywhere in the world!
This is a small bot which draws on a plane surface. It takes input as GCODE and draws that pattern on surface. there are no limits to canvas
A two-wheel robotics platform built on the Arty development board.
This is a low cost robot that will help students in better learning and understanding.
Build a dynamic audio visualizer that responds to music, voices and other auditory input using Pmod MIC, Arduino Uno and Processing.
How to control motors using PWM, the MiniZed and a touchscreen controller.
I have revamped the control system of this 20-year-old 5DOF articulated robotic arm with TP controls and programming interface integrated.