An automated, smart, self-contained growing system that cultivates plants from seed to maturity!
Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
Training board for essential logic gates.
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Leveraging HLS functions to create a image processing solution which implements edge detection (Sobel) in programmable logic.
Creating an image processing platform that enables HDMI input to output. This can be used as a base for HLS-based image processing demo.
Not all imaging systems need to be expensive. Solutions can be created using cost optimized FPGA and CMOS image sensors directly.
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.
Building on the Zybo Z7 image processing application. This project demonstrates using HLS with C/C++ to accelerate image processing.
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
This project creates an FPGA-controlled hexapod robot which is capable of walking and navigating around its environment using sonar and IMU.
PLC IEC-61131-3 ladder programming >>> Modbus TCP/IP >>> PID tuning >>> HMI >>> Wiring diagram.
This project is a GPS tracking system with LCD display using an Arduino Uno and a Digilent PmodGPS.
Robotics are at the leading edge of Industry 4.0, AI and the Edge revolution. Let's look at how we can create an FPGA-controlled robot arm.
Build a weather station with Arduino & ASP.NET Core.
Part one of a project that will demonstrate the building of an FPGA/SoC-based hexapod robot.
In this project, we have made an automatic water tap using Arduino and IR sensor to solve the problem of wastage of water in our daily life.
Smart plug with remote monitoring (temperature, current, voltage, energy), control (automatic, manual, voice, proximity) and notification.
Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.
This is the 2nd tutorial on my ESP32 learning journey. Here, an OLED shows time and captured data by DHT sensor (temperature & humidity).
Or connect with your social account:
New here? Create an account