Builds on the project Mini But Mightyu, the MiniZed and Vitis for Motor Control using the built in accelerometer to control the speed.
Anitrack is an autonomous system that can track an animal's position, measure its temperature, its heart rate and its movements.
Motor driver circuit with some power saving features.
An Arduino-based chemostat controlling cell growth in a MFC (Microbial Fuel Cell). [Currently this page is a WIP, busy being updated. ]
The Convertible LED Matrix Clock is a new take on designing LED displays. Its design allows it to be converted into two different modes.
This is a very simple way to control a 3-phase AC installation in a delta configuration.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
This tutorial is about a car parking space monitoring system using a computer application designed in Visual Basic.net...
This circuit divides the voltage to three ranges: 12V DC, 9V DC and 5V DC.
Measures tVOCs (Total Volatile Organic Compounds) + eCO2, dust density even for small particles >0.5μm, temperature and relative humidity.
OpenCM is a micro-manipulation framework based on the UC2 system.
Are you tired of giving any surplus of your homemade electricity to your electric grid provider? Here is the solution to stop the waste!
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
This is a small bot which draws on a plane surface. It takes input as GCODE and draws that pattern on surface. there are no limits to canvas
This revisionist's project examines the meanings of being ALIVE and being AWARE based on the Caveman in the Box Theory.
The fundamental purpose of this work is to extract book properties from the title pages of antique books and classify them accordingly.
A smart glove that translates sign language letters into written letters with monitor.
HuGo is a humanoid robot, created by 3D printing technique, controlled by FPGA boards using sensors, actuated by servo motors.
Easy to use Platform to learn VHDL. Running on a ZYBO over the web.
GigE Vision camera bridge prototype using the Zybo Z7-10 board with a Digilent Pcam 5C camera connected to it.
A virtual reality system using a similar device to Google Cardboard, a compatible phone and a lot of cables.
The aim of this project is to process LiDAR and camera data on Zybo Z7-20 to detect objects with usage of data fusion.
AES CryptoCores is a dedicated hardware module which helps for encryption and decryption of data using the desired key.
Hamparsum Note Convertor system which has historical importance is taken with Pcam5c and converted into current note system.