In this tutorial we will learn how to make a simple step counter. This project is very useful in robotics.
There's thermostats on the wall, weather apps on your phone, but is there an accurate way to measure temperature freely?
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
This simple project uses Xilinx Vitis 2020.1 to run an up/down BCD counter on Basys-3 board.
In this second tutorial I will be sending text and color data through the internet.
Nothing like a good old game of Tetris on overpowered hardware.
The goal of this project is to demonstrate the capability of HLS in designing a digital clock system.
This project implements a digital dice roller on Basys3 board using HLS.
This mini-project shows how to display a floating-point number on 7-segments using C/C++ HLS.
Using an example, this project demonstrates the impact of the combinational circuit design in HLS.
A digital clock completely built from scratch without any coding or microcontroller. Just by using only 74xx and 40xx series digital IC.
This project demonstrates the capability of high-level synthesis in describing digital systems by implementing a 0-9 Up/Down counter.
You'll learn how to communicate two Arduinos via RS485.
In this project I'll show you how to implement a BCD decoder on the BASYS 3 using the switches and the 7 segments display on the board.
Lets build a small cute 5*5 RGB LEDMATRIX
RGB LEDs triangular/hexagonal pixels matrix.
I decided to build a laser gun to compete with my friends a little. As I decided I did.
An animated cube made with 512 RGB LEDs driven by an ATmega328.
This project respects the norms of social distancing. Thus, the owner can communicate with the safe from any distance Great for this period!
Real-time pixels to LED display.
Minimalistic Emergency ventilator with fine control over BPM, tidal volume and flow rate, with a digital interface.
A DIY home-made giant 10 x 10 LED board, it's bright, colourful and cool.
Actual PWM duty cycle on 7-segment LED display, driven by hardware (PL) and controlled by software (PS).
This project uses an LCD screen and DHT22 to display temperature and humidity data, simultaneously collected from two different locations.