In this project we are going to connect and configure a PCIe WWAN modem to a Zynq MPSOC using Petalinux and the Genesys ZU 5EV board.
The goal is to offload basic I/O processing to a FPGA and read/write the results via SPI from Raspberry PI Zero
See how to use the Zmod AWG DAC converter with the Eclypse Z7 FPGA board using Vivado 2021.2.
IR Sensor project with Arduino
Add Sensors and device control quickly and easily to LabView without having to add any drivers!
Three marker beacon station (IR Sensors) are on the ground and detecting the aircraft is approaching the runway passing over the Markers.
B-Hive is an autonomous electronic monitoring device enabling beekeepers to oversee their hives' well-being.
Take care of your pet from anywhere in world in a real-time with Arduino, Android and and ASP. NET Core.
The autonomous device will send the vehicle position to the android app with time and will show the location on google maps.
To prevent the accident in advance and if accident occurs then there will be a prevention system to notify emergency services before time.
You'll learn how to communicate two Arduinos via RS485.
A PIC16F886-based CW auto keyer with USB and Morse key interfaces.
Interacting with Atlas Scientific sensors over USB.
Work with AT Commands using your SIM800L module.
This project aims to create transmission line between two links using FPGA cards and solve the synchronization problems with ADPLL.
TI-RTOS, operating system for the Texas Instrumets microprocessors. Application of the LRM (Long Range Mode) on the RC-CC1310-868 device.
We are making a smart flight helmet with features such as night vision, emergency situation, Mayday alert, flight information, map, etc.
Johnny the robot will be able to react to instructions it receives from its user through the MHI on a digital tablet (pick up objects, etc).
A Radar that detects objects with the help of sound waves is going to be implemented. Radar screen will be created on a HDMI screen.
We design a flexible, remote-controlled test system for polar codes in FPGA.
It's a Morse code receiver base on processing the light signals.
I built the right and left mouse buttons with wall switches.