You'll access the file and learn how to use this board to create all type of prototypes and product tests.
Are we neglecting the importance of water? Probably, the answer is YES. Go through this different and versatile project to find a solution.
Ever looked to the skies and wondered what it would be like to roam across the stars, look here to create your own 3d-printed drone!!!
In this Tutorial, we are going to be making our own customized Arduino Uno board and I will be showing you how easy it is to make one.
Numeric machine development including different modules, control board for the steppers, for user interface, software, visuals,... Semi-pro
Relay Shield can be used to be control devices wirelessly with your smartphone from anywhere.
Just a mouse.
Senses the vibration of the toilet flushing, and closes the toilet seat
Using a IR proximity sensor and microcontroller to find the local values of 'g' and will plot a real time damping curve.
Have you ever tried to create a real spinning Jet yourself! checkout the detailed making steps in this Hackster post.
A controller made with c++ and python
How to make a simple laser beam tracking system
Using a TI F28379D Launchpad and a plastic recorder we coded a robot to move. Using WiFi an ESP8266 sent the notes to LABView on a computer.
A robot with IR and UT sensors to wall follow is tailed by another robot using a USB camera with the help of two MyRios and TI C2000 chip.
Chsel is a robot car that searches for various fruits, collects them and delivers them to a home base.
I made this project because it can shorten the time of garbage disposal to a temporary dump that is carried out by the cleaners on my campus
The balancing “Segbot” (mouse) receives commands wirelessly from LabView, to escape the deadly claws of the all-seeing robot cat.
A tone-detecting, line-following, break-dancing robot car!
This project uses a self balancing two-wheeled robot to navigate a user drawn path as well as dance using beat detection.
An autonomous robot that line follows and moves 'snowballs' in its path out of the way and then continues lane following. Mimics a snowplow.
Breanna Chan and Brenna Kelly's final project for ME 461
This machine, built around a MSP430G2ET, uses a DC motor to deal out a card when motion is detected within 4 inches of an ultrasonic sensor.
This is a project designed to teach Digital Logics Design containing hardware setup instructions, lab deliverables, and example designs
This first part of a series on building a helper robot describes the planning stages and early systems integration testing.