How to sample with High Speed ADC and DAC in FPGA and perform signal processing on the received signal
Will show you how to use AD2 to debug the UART protocol.
Detailed informations, facts, and delusions about Rife machines, and whether these devices really heal.
In this project we are going to implement an IIR filter in an FPGA from scratch using bilinear transform and the prewarping technique.
Virtualise a non-linear sensor into a single linear function using the LInterp PROGMEM array generator
Measuring resistance of short conducting wire in milliohms is not possible with multimeters but they can measure millivolts accurately.
See how to script a series of test measurements for automated testing on the ADP3450.
Using the ADP3450, this project measures amount of delay between asserting FPGA IO on base of NPN 2N3094 and LED illuminating on collector.
Creating custom applications is pretty straightforward in PetaLinux, but to debug them, Vitis comes into play.
Using LINX toolkit in Labview
The application is used to detect and store the signals from a MeC (Microbial Electrolysis Cell for hydrogen production)
See how to get the TE0711 SoM running on the TE0701 baseboard from Trenz Electronic.
Implement a 4-channel TDC on Cmod A7 35 using MicroBlaze and SRAM with 30ps rms and measurement rate of 60MSa/s
See how to get up and running with the new ADP3450 USB Oscilloscope to fulfill your bench top test equipment needs.
See how to integrate your custom FIR with Xilinx DSP IP such as their DDS Compiler IP.
Continuing with my simple FIR filter Verilog module, this project walks through how to rewrite HDL logic when setup timing violations occur.
In this project the ADP3450 Oscilloscope/Function Generator/Logic Analyzer has been used to analyze various signals.
This project walks through how to implement a simple FIR filter with pre-generated coefficients in Verilog.
Creating a PYNQ image for the MicroZed 7010/20 and IO Carrier Card. Signal processing with XADC.
A digital clock completely built from scratch without any coding or microcontroller. Just by using only 74xx and 40xx series digital IC.
Zynq US+ is an heterogeneous device with different kind of devices inside. On this project I will show you how to use all of them together.
Using Eclypse Z7 to generate an FSK signal and Genesys ZU for implement a single tone detector algorithm executed in the RTU.
In this project a 32ord FIR filter is computed by C application from PetaLinux. Input and output filter signals are synthesized by ZMOD DAC.
Projectile speed measurement with arduino!