This project aims to create transmission line between two links using FPGA cards and solve the synchronization problems with ADPLL.
The purpose of this project is to create a radio map of the disaster area using reception devices placed near the affected area.
Local area network traffic analyzer with parallel string matching.
Project with a social purpose to aid the visually impaired. The glasses can detect obstacles up to 4m away and are readjustable.
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely without taking
This project demonstrates how easy you can use the DMMShield from Digilent with all Arduino boards.
Let's write an efficient SRAM controller in Verilog.
The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
Exploring pulse width modulation, pulse density modulation, and digital to analog conversion using the Analog Discovery 2 and Waveforms!
A discussion about digital sound synthesis.
Learn about photoresistors and the process of characterizing their response to light intensity.
An R/C servo can be used to make a gauge to measure the intensity of light.
This time we learn Bluetooth RC Car
Exploring the signals behind Arduino's Servo library, and characterizing a servo's response to pulse width.
Use Python, OpenCV libraries and the PYNQ frame to implement the computer vision on Arty Z7-20 Xilinx Zynq SoC platform.
This getting started guide teaches you how to program Python on Digilent Arty Z7-20, the Xilinx Zynq Z7020 SoC platform.
Arduino boards don't have analog outputs. But they do have a function called analogWrite. So what is it doing there?
Characterizing button switching behavior is an important first step for developing effective debounce algorithms in your systems.
Readers can learn how to collect and display the environmental data through Arty S7, 4 Pmods and a touchscreen display.
I made an RC car to use with a Bluetooth module.
This project proposes the creation of a graphics library in order to generate and manipulate the graphic information only using VHDL.
I have created a graphical user interface for LIRC that allow you to control you Raspberry Pi universal remote with LabVIEW.
An introduction to LINX 3.0 which adds the ability to deploy LabVIEW code to run on BeagleBone Black and Raspberry Pi 2 and 3.
The tutorial takes you into the intricacies of the BLE protocol and how to integrate the BLEPeripheral library into the RAK iTracker module.
Or connect with your social account:
New here? Create an account