Minimalist cars race with a strip of smart LEDs and two switches.This project has evolved and now has its own website: www.openledrace.com
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
Let's teach Neural Network how to do a job for us.
Radio that works with analog signal is implemented digitally on FPGA via VHDL.
How to make an easy CNC-plotter using Arduino.
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.
This project is meant to protect you from any thief who may try to hack the password to your system.
This is a BMS charger that would be as universal as possible for testing Li-ion or LifePo4 cells.
Touchless door handle mechanism that can be used in every door just replacing the standard handle. Very useful for people with disabilities.
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
This revisionist's project examines the meanings of being ALIVE and being AWARE based on the Caveman in the Box Theory.
Integrate Siemens SIMATIC and LOGO and some modbus, bacnet HVAC controllers to cloud, prepare data for visualization and standard storage.
GigE Vision camera bridge prototype using the Zybo Z7-10 board with a Digilent Pcam 5C camera connected to it.
This is a project that aims to build an RGB LED P6 panel based LED Clock using RPi Zero W and Electrodragon interface board.
This is a E-ink dashboard that provides real-time information pulled from API using a Raspberry Pi Zero.
Find the location of a device, using multiple DWM1000-ESP8266 pairs, and an FPGA.
This is a very simple way to control a 3-phase AC installation in a delta configuration.
This study is an example how to build a 3-phases 230V/380V from a 12-24V DC with an Arduino Uno
An autonomous car able to drive along a lane and react to roadsigns, obstacles and smart RFID markers, powered by OpenCV and Embedded Linux.
Motor driver circuit with some power saving features.