Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
An animated cube made with 512 RGB LEDs driven by an ATmega328.
You'll learn how to communicate two Arduinos via RS485.
You'll learn how to create an automation system to communicate 3 Arduinos via RS485.
Interface a CMOS camera with a ZYNQ-7000 series FPGA SoC and output live video feed to a VGA screen.
Minimalistic Emergency ventilator with fine control over BPM, tidal volume and flow rate, with a digital interface.
This tutorial shows how to use the data collected from LoRa nodes into beautiful graphs and visualization using Node-red and Grafana.
hii, friends I hope you all are fine today i'll show you how to Make TV Ambilight Using Arduino This is a very easy project.
Lets build a small cute 5*5 RGB LEDMATRIX
RGB LEDs triangular/hexagonal pixels matrix.
I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.
Use your hand to control the height of a pixel, and then navigate through a map full of obstacles to avoid. Get to the end to win!
I decided to build a laser gun to compete with my friends a little. As I decided I did.
Review of the "ELEGOO Mega 2560 The Most Complete Starter Kit Compatible With Arduino IDE". Starter kit with more than 200pcs components
Actual PWM duty cycle on 7-segment LED display, driven by hardware (PL) and controlled by software (PS).
An Arduino-based programmable light suit for dancers.
This project proposes the creation of a graphics library in order to generate and manipulate the graphic information only using VHDL.
The Convertible LED Matrix Clock is a new take on designing LED displays. Its design allows it to be converted into two different modes.
Nothing like a good old game of Tetris on overpowered hardware.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Application notes for Pmod OLEDrgb and Arduino Uno. In this app, we will setup a message to display in different sizes and colors.
A Radar that detects objects with the help of sound waves is going to be implemented. Radar screen will be created on a HDMI screen.
In this tutorial we will learn how to make a simple step counter. This project is very useful in robotics.
SPI Interface code for Pmod ALS (8-bit ADC) in Verilog is implemented from scratch,and transmitted to 7-seg display on Basys3 FPGA board.
