Full procedure with theory explaining the concept behind a line follower robot
This project allows anyone to turn a Raspberry Pi into a universal remote using LIRC (LINUX Infrared Remote Control).
Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
Work with AT Commands using your SIM800L module.
A smart city is an urban area that uses different types of electronic data collection sensors to supply information used to manage assets.
An automated, smart, self-contained growing system that cultivates plants from seed to maturity!
Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
Because LED are fun - but addressable rocks. :)
Design of an indicative featured and speed controlled obstacle avoiding robot.
Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
Hello Friends, In this video How to use IR sensor with Arduino? (With full code)
Minimalist cars race with a strip of smart LEDs and two switches.This project has evolved and now has its own website: www.openledrace.com
Nice looking weather forecast for Raspberry Pi Zero and Ili9341 based 2.8 inch TFT.
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
we performed the control of the stepper motor in the forward and backward directions along the x axis with the joystick
How to make DIY Fingerprint Door lock System using r307 fingerprint module
I use 788bs, a common anode 8x8 led matrix Modules for this project. Learn how to identify matrix pinout, how to interface with Arduino.
A discussion about digital sound synthesis.
How to make a Car Speed Detector using Arduino and IR Sensor
RGB LED backlight with audio signal visualization for room/desk backlightning...
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
PLC IEC-61131-3 ladder programming >>> Modbus TCP/IP >>> PID tuning >>> HMI >>> Wiring diagram.