Robot made with motor controller, signal distribution, and servo controller board, it's controlled through the network.
Will show you how to use AD2 to debug the UART protocol.
An autonomous car able to drive along a lane and react to roadsigns, obstacles and smart RFID markers, powered by OpenCV and Embedded Linux.
SPI Interface code for Pmod ALS (8-bit ADC) in Verilog is implemented from scratch,and transmitted to 7-seg display on Basys3 FPGA board.
Using the ADP3450, this project measures amount of delay between asserting FPGA IO on base of NPN 2N3094 and LED illuminating on collector.
Configuring Window watchdog (WWDG) on STM32 Nucleo-F401RE and test it.
The goal of the project is to build a "Roomba" type quadrupedal robot that uses an IMU and Ultrasonic Sensor to detect its surroundings.
See how to get up and running with the new ADP3450 USB Oscilloscope to fulfill your bench top test equipment needs.
This project walks through basic RF testing for hardware/software verification of SDRs on the Ettus B205mini USRP.
Application notes for Pmod OD1 and Arduino Uno. In this app, the motor will be programmed to accelerate & decelerate at specific intervals.
See how to script a series of test measurements for automated testing on the ADP3450.
We created a Spider-Roomba that has multiple forms of control and autonomous capability including visual and auditory feedback.