This is the start of a new series where we learn how to build a dashcam using the Raspberry Pi Zero.
ESP32 + HTTP server + WebSockets + Bootstrap + Husarnet + configuration and HTML files on SD card.
We take a look at a very interesting GitHub repository that enables video recording on the ESP32-CAM board.
When the reset button is pressed, the board will take an image, store it to the microSD card and it will then go back to deep sleep.
This is the first post in a new mini-series, where we build a home surveillance system, mainly using Raspberry Pis.
Our Gnome is ready to follow you in your travels and keep track of all the places you visit, thanks to a GPS shield and the Nano Every.
In part 3 of this series, we evaluate NVR options for both the Raspberry Pi and for a Windows PC.
This post will show you how you can build a simple time-lapse camera using a Raspberry Pi.
We will obtain and display the video feeds from two network cameras we built previously.
In this post, we will learn how to install Home Assistant on the Raspberry Pi and we will also learn how to view the ESP32-CAM steam.
Raspberry Pi-based video conferencing unit that a senior does not have to touch at all. Relatives can call her any time to give support.
We install OpenCV, write test scripts to capture an image and also carry out colour separation using OpenCV.
In this post, we are going to look at 3 different methods by which you can remotely access the Raspberry Pi.
A security system, with motion detection, based on a raspberry pi 3 model B and an usb webcam.
Collecting large data sets is key to applied data science. Use the techniques in this project to collect data on your BBC micro:bit.
This tutorial will go through, step-by-step, how to bring up a simple OpenAMP application on the SnickerDoodle Black from the ground up!