Contains a linear scale in which the frequency is displayed with an color LED dot which is an integral part of the WS2812 LED strip.
The very easy way to control led rgb ws2812b with WLED app and ESP8266 based microcontroller Wemos D1 Mini
Simple communication system with lora E32 and Arduino, ideal for simple telemetry.
Let's Dance, put on your red shoes and dance the blues
RGB LED backlight with audio signal visualization for room/desk backlightning...
MoveThisWay is an autonomous robot that transports heavy payloads on programmable paths with obstacle detection capability.
Managing address WS2812B strip with ESP8266 via the web interface.
Module measures if distance to others is less than 1.5m. If so, the alarm starts with sound and LED. Stay home, stay safe.
A scrolling text display, using 294 LEDs to simulate a stock exchange ticker.
A DIY home-made giant 10 x 10 LED board, it's bright, colourful and cool.
Because LED are fun - but addressable rocks. :)
An interesting light display using 64 glue sticks and 128 WS2812B RGB LED strips.
Use your hand to control the height of a pixel, and then navigate through a map full of obstacles to avoid. Get to the end to win!
Our Gnome becomes a weather forecaster with an Arduino Nano Every and a pressure sensor. Get your local forecast without the internet.
We build a simple RGB decorative light using an Arduino Nano and WS2812B LEDs.
Translate music to a dazzling light show with this customizable light controller project. Great for DJs, parties, and 1:1 shows!
A test system for up to 255 WS2812B RGB LEDs. It can test rings, panels and strips built from WS2812B LEDs.
How to control LED RGB WS2812B (Neo Pixel/ Addressable LED) using Arduino, Bluetooth Modul HC05 and and Android Application made by MIT APP
I decided to build a laser gun to compete with my friends a little. As I decided I did.
It allows you to change theme of your LED pixel strip in an easy way over the internet in two modes: real-time display or saved animation.
A low profile controller for NeoPixel - with easy programming. It's a cool project.
Motors, LEDs, and Christmas trees. Make your very own electronic zoetrope and hang it on your tree.
Lets build a small cute 5*5 RGB LEDMATRIX
its has 5 different animations, light intensity control and sensitivity control. super easy let's start