Because LED are fun - but addressable rocks. :)
RGB LED backlight with audio signal visualization for room/desk backlightning...
Managing address WS2812B strip with ESP8266 via the web interface.
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
An interesting light display using 64 glue sticks and 128 WS2812B RGB LED strips.
The very easy way to control led rgb ws2812b with WLED app and ESP8266 based microcontroller Wemos D1 Mini
its has 5 different animations, light intensity control and sensitivity control. super easy let's start
How to control LED RGB WS2812B (Neo Pixel/ Addressable LED) using Arduino, Bluetooth Modul HC05 and and Android Application made by MIT APP
A scrolling text display, using 294 LEDs to simulate a stock exchange ticker.
Simple communication system with lora E32 and Arduino, ideal for simple telemetry.
Lets build a small cute 5*5 RGB LEDMATRIX
A system that gives my bike front and tail lights, a turn signal, and a speedometer, all in a clean and simple design.
Our Gnome becomes a weather forecaster with an Arduino Nano Every and a pressure sensor. Get your local forecast without the internet.
hii, friends I hope you all are fine today i'll show you how to Make TV Ambilight Using Arduino This is a very easy project.
MoveThisWay is an autonomous robot that transports heavy payloads on programmable paths with obstacle detection capability.
Use your hand to control the height of a pixel, and then navigate through a map full of obstacles to avoid. Get to the end to win!
This is a thermometer intended for measuring the temperature in the room where we are staying, also known as room comfort thermometer.
In this project it is presented 1-dimensional version of the classic game ‘Pong’ made with NeoPixel LED strip.
Contains a linear scale in which the frequency is displayed with an color LED dot which is an integral part of the WS2812 LED strip.
I decided to build a laser gun to compete with my friends a little. As I decided I did.
Translate music to a dazzling light show with this customizable light controller project. Great for DJs, parties, and 1:1 shows!
How to make balancing LED dot using WS2812 LED strip and MPU6050 accelerometer and gyroscope module.
A test system for up to 255 WS2812B RGB LEDs. It can test rings, panels and strips built from WS2812B LEDs.
I built a 3D scanner that can predict whether peanut M&Ms have peanuts in the center, or are pure chocolate.