PID control system of a light meter that measures and regulates the lighting of a lamp.
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
An Arduino-based programmable light suit for dancers.
This circuit divides the voltage to three ranges: 12V DC, 9V DC and 5V DC.
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. New release 1.1 Manual
The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
Are you tired of giving any surplus of your homemade electricity to your electric grid provider? Here is the solution to stop the waste!
OpenCM is a micro-manipulation framework based on μCube.
A solar-powered IoT device for monitoring sound level, air quality, humidity, and temperature.
Project with a social purpose to aid the visually impaired. The glasses can detect obstacles up to 4m away and are readjustable.
No more energy loss. Easily switch ON/OFF individual appliances connected to a power strip with your smartphone or PC.
An Arduino-based robot drummer. It works with a transistor noise-generator and an arrangement of servos hitting a can and a pair of piezos.
How to connect A6 GSM GPRS module with Arduino and also work with “AT” commands.
Work with AT Commands using your SIM800L module.
A simple tutorial to set up ICStation's DC to DC automatic boost buck converter (5 - 32V to 1.25 - 20V 5A) for electronic use.
Test and comparison of two PWM methods, to control the battery charge of a "Night Light Control:" 1) Sine function; and 2) PID controller.
Current sprinkler systems leave much to be desired, so we've designed a sprinkler system that works smarter and saves water!
PLC IEC-61131-3 ladder programming >>> Modbus TCP/IP >>> PID tuning >>> HMI >>> Wiring diagram.
Training board for essential logic gates.
Two wearable devices that become a fitness tracker using the NXP Rapid IoT prototyping kit, ESP8266 board and AWS. Alexa compatible!