Make a Big LED clock with arduino and RTC module to make it as a Real Time Clock.
The Light Badge is an electronic kit which utilizes an LDR to detect lowering light levels and light an LED once it gets dark.
Fires decimate lives. Our drone is a quick and cheap solution that can provide AI fire detection and real-time streaming using 4G LTE.
The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
An Arduino-based robot drummer. It works with a transistor noise-generator and an arrangement of servos hitting a can and a pair of piezos.
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Green roofs have been proven to increase Solar Panel's performance. What are the optimal plants that provide the best efficiency ?
Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
Project with a social purpose to aid the visually impaired. The glasses can detect obstacles up to 4m away and are readjustable.
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
A solar-powered IoT device for monitoring sound level, air quality, humidity, and temperature.
Training board for essential logic gates.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
2 in 1 vending machine, send mobile top-up, recharge prepaid phone and a wifi hotspot to provide internet access
How to connect A6 GSM GPRS module with Arduino and also work with “AT” commands.
My young children were not tall enough to pull the chains on the ceiling fan, to turn on the fan & light. Alexa, turn on the 'Boys Light'.
Work with AT Commands using your SIM800L module.
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Monitoring and controlling my UPS from Cayenne with SparkFun ESP8266 Thing Dev Board.
Imagine 120V, coming out of 2 controllable outlets. All coming from a (wireless) box with WiFi. Yeah, that's what we're talking about.
A robot capable of motion in response to our gestures.