The Light Badge is an electronic kit which utilizes an LDR to detect lowering light levels and light an LED once it gets dark.
Make a Big LED clock with arduino and RTC module to make it as a Real Time Clock.
Fires decimate lives. Our drone is a quick and cheap solution that can provide AI fire detection and real-time streaming using 4G LTE.
Green roofs have been proven to increase Solar Panel's performance. What are the optimal plants that provide the best efficiency ?
2 in 1 vending machine, send mobile top-up, recharge prepaid phone and a wifi hotspot to provide internet access
Anitrack is an autonomous system that can track an animal's position, measure its temperature, its heart rate and its movements.
Autonomous car, built from a LEGO frame, which responds to nearby objects and can also be manually controlled via remote control.
This project aims to implement interesting methods of driving an RC car right from your phone!
Current Source DAC AD5420 and Arduino UNO
This project uses an LCD screen and DHT22 to display temperature and humidity data, simultaneously collected from two different locations.
It feels awesome when you have the power to control things remotely.
The MyPi is a well documented kit that uses a Raspberry Pi 3 running RetroPie to create a large screen handheld retro game system.
This is a very simple way to control a 3-phase AC installation in a delta configuration.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
An Arduino-based programmable light suit for dancers.
This circuit divides the voltage to three ranges: 12V DC, 9V DC and 5V DC.
OpenCM is a micro-manipulation framework based on the UC2 system.
A solar-powered IoT device for monitoring sound level, air quality, humidity, and temperature.
Are you tired of giving any surplus of your homemade electricity to your electric grid provider? Here is the solution to stop the waste!
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
How to connect A6 GSM GPRS module with Arduino and also work with “AT” commands.
Work with AT Commands using your SIM800L module.
Test and comparison of two PWM methods, to control the battery charge of a "Night Light Control:" 1) Sine function; and 2) PID controller.