Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.

This project shows how I used the Kria KR260 & Edge Impulse to transform the Land Rover Defender Lego Technic kit into an autonomous robot.

How to use the MiniZed with the Vitis embedded flow for motor control applications.

Adding a display to the MiniZed Motor Control live build equals an alarm clock that will be sure to start your day off on a good note.

Actual PWM duty cycle on 7-segment LED display, driven by hardware (PL) and controlled by software (PS).

How to control motors using PWM, the MiniZed and a touchscreen controller.

FPGA are ideal for precision motor control, in this project we are going to create a simple motor control application which we can build on.

Extension of 'Mini But Mighty, the MiniZed and Vitis for Motor Control' project by Adam Taylor with HC-SR04 to control the speed.

Application notes for Pmod HB3 and Arduino Uno. In this app, a motor will be controlled and the status displayed on the serial monitor.

Learn how to build a speech controlled robot with Tensil, Digilent Arty A7 FPGA board and Pololu Romi chassis.

Builds on the project Mini But Mightyu, the MiniZed and Vitis for Motor Control using the built in accelerometer to control the speed.

Based on Adam Taylor's - Mini But Mighty, the MiniZed and Vitis for motor control, Bob the Blue Robot Dude dances to MiniZed control.

This project demonstrates how to drive an N20 micro-gear motor with encoder using a Digilent HB3 motor controller PMOD with the Kria KR260.

Learn how to build a speech controlled robot with Tensil and Digilent Arty A7 FPGA board