Uses a gyroscope to display acceleration data in three axes on a 16x2 LCD display and through PWM on 4 RGB LEDs.
This dog bed is able to track the sleeping habits of your dog, as well as analyzing the sleep quality of your best friend.
Use VHDL to implement a simple digital Combination Locker State Machine on the Nexys4 FPGA Board. Designed in Xilinx Vivado.
A smart parking mobile app to assist you in finding and reserving an available parking spot nearby so that others wouldn't beat you to it.
Digitizing household mechanical switches with CoolMOS C7. `
For this project, I used LabVIEW to create a Raspberry Pi controlled Sumobot.
Automatic and controled plant irrigation system with data monitoring through internet, locally or via SMS + alerts.
No more energy loss. Easily switch ON/OFF individual appliances connected to a power strip with your smartphone or PC.
Application notes for Pmod NAV and Arduino Uno. In this app, all data from the Pmod NAV will be displayed in the serial monitor.
The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
GigE Vision camera bridge prototype using the Zybo Z7-10 board with a Digilent Pcam 5C camera connected to it.
A simple guessing game using the Arty development board and a terminal emulator.
This project allows you to control a fan and a servo over WiFi with LabVIEW.
Arduino boards don't have analog outputs. But they do have a function called analogWrite. So what is it doing there?
An introduction to LINX 3.0 which adds the ability to deploy LabVIEW code to run on BeagleBone Black and Raspberry Pi 2 and 3.
How to flash MicroPython on a Sonoff Smart Switch to prepare for communication with Cloud4RPi service.
A simple IR receiver setup controlling 2 LED by a relay board
A 5-axis robot, all 3D-printed, with an Arduino Nano and miniSD card. Path programming and control by IR remote.
This project uses a tablet running Data Dashboard and a Raspberry Pi to wireless control a WF32 fan set up.
How To Make ARDUINO Kotatsu! Kotatsu with ARDUINO starts from scratch, winter project! World's first guide to make Arduino kotatsu.
In this tutorial, we will go over how to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW.
Using LabVIEW 2014 and LINX 3.0, we created two wirelessly controlled Sumobots.
Using Pynq, we can implement an accelerated AI/ML on an FPGA without writing a line of HDL! Let's take a look at how we can this...
Generate a sound described by Fourier Analysis coefficients. FPGA gives a possibility of generating complex sounds in real time.
Or connect with your social account:
New here? Create an account