We will show you, how to start work with MIPI, using Vivado "Open Example Design" feature
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
This project fixed my problems with hot and cold rooms and logs details about how it was done, to compare to my ecobee4 thermostat details.
An Arduino-based clock project.
Minimalist cars race with a strip of smart LEDs and two switches.
Get real-time crop rates, smart monitoring of your farm using Particle Integrations. Boost your crop production with full control.
An Arduino-based chemostat controlling cell growth in a MFC (Microbial Fuel Cell). [Currently this page is a WIP, busy being updated. ]
Use your hand to control the height of a pixel, and then navigate through a map full of obstacles to avoid. Get to the end to win!
It feels awesome when you have the power to control things remotely.
A digital finger sensor to protect against theft.
Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
A colorful butterfly containing 14 WS2812B RGB LEDs driven using a Arduino Digispark.
OpenCM is a micro-manipulation framework based on the UC2 system.
Build a wearable impact force monitor to help keep your very important brain (and body) safe!
Are you tired of giving any surplus of your homemade electricity to your electric grid provider? Here is the solution to stop the waste!
The Convertible LED Matrix Clock is a new take on designing LED displays. Its design allows it to be converted into two different modes.
Intrusion detection by the help of the PIR sensor. Whenever someone tries to come in signal will found in the form of a text message.
Want a way to control a light and water for your indoor crops using IoT? This project might interest you.
This revisionist's project examines the meanings of being ALIVE and being AWARE based on the Caveman in the Box Theory.
A street light/lamp that efficiently (saves energy) manages electricity usage.
How to get the PYNQ and Matrix Voice to work with each other.
Leveraging FPGA capabilities to design and to implement a Frequency Hopping Spread Spectrum (FHSS) System.
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.