Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
RGB LEDs triangular/hexagonal pixels matrix.
Interactive snake enclosure that is temperature and humidity controlled and uses lat-long to mimic natural light cycles, with an online cam.
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
How to build an humidity and temperature meter with time display from an old voltage meter casing.
Remember the days when you would sit listening to WWV time signals on your shortwave radio (tick, tick, tick…At the tone, the time will be…)
The Convertible LED Matrix Clock is a new take on designing LED displays. Its design allows it to be converted into two different modes.
This is a 7 Segments counter with arduino
This project uses an ultrasonic sensor to allow a "hand wave" (no touch!) to trigger a series of LED's and the Happy Birthday song twice
A digital clock completely built from scratch without any coding or microcontroller. Just by using only 74xx and 40xx series digital IC.
A 3D printed clock driven by a single stepper motor using gears to separate hours, minutes and seconds.
Implement a 4-channel TDC on Cmod A7 35 using MicroBlaze and SRAM with 30ps rms and measurement rate of 60MSa/s