Minimalistic Emergency ventilator with fine control over BPM, tidal volume and flow rate, with a digital interface.
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
RGB LEDs triangular/hexagonal pixels matrix.
I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.
hii, friends I hope you all are fine today i'll show you how to Make TV Ambilight Using Arduino This is a very easy project.
Lets build a small cute 5*5 RGB LEDMATRIX
The Convertible LED Matrix Clock is a new take on designing LED displays. Its design allows it to be converted into two different modes.
Nothing like a good old game of Tetris on overpowered hardware.
A DIY home-made giant 10 x 10 LED board, it's bright, colourful and cool.
Digitizing household mechanical switches with CoolMOS C7. `
SPI Interface code for Pmod ALS (8-bit ADC) in Verilog is implemented from scratch,and transmitted to 7-seg display on Basys3 FPGA board.
Use your hand to control the height of a pixel, and then navigate through a map full of obstacles to avoid. Get to the end to win!
Actual PWM duty cycle on 7-segment LED display, driven by hardware (PL) and controlled by software (PS).
A Radar that detects objects with the help of sound waves is going to be implemented. Radar screen will be created on a HDMI screen.
Uses a gyroscope to display acceleration data in three axes on a 16x2 LCD display and through PWM on 4 RGB LEDs.
By analyzing atmospheric values, this tiny unit can decide when to irrigate your garden if it is necessary.
A digital clock completely built from scratch without any coding or microcontroller. Just by using only 74xx and 40xx series digital IC.
This project implements a digital dice roller on Basys3 board using HLS.
Porting Arduboy to SAMD51 MCU and ILI9341 TFT display using Wio Terminal.
Monitoring digital circuits can be difficult at best. Sometimes it's nigh impossible. But the Digital Discovery makes it easier!
As a fun start to 2022, I pulled out the HP vintage bubble displays I bought on eBay with a simple Verilog controller module on the Arty Z7.
In this second tutorial I will be sending text and color data through the internet.
Now with 5 exciting modes of operation: music equaliser, 2-player pong, animator, spirit level and voltage display.
Using an example, this project demonstrates the impact of the combinational circuit design in HLS.