Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
Minimalist cars race with a strip of smart LEDs and two switches.
A digital finger sensor to protect against theft.
Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
Training board for essential logic gates.
A solar-powered IoT device for monitoring sound level, air quality, humidity, and temperature.
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Leveraging HLS functions to create a image processing solution which implements edge detection (Sobel) in programmable logic.
Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.
Project with a social purpose to aid the visually impaired. The glasses can detect obstacles up to 4m away and are readjustable.
Not all imaging systems need to be expensive. Solutions can be created using cost optimized FPGA and CMOS image sensors directly.
The PiNG Video Doorbell is powered by a Raspberry Pi and uses Google Duo to video call you on your phone when a visitor presses the button.
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!
Building on the Zybo Z7 image processing application. This project demonstrates using HLS with C/C++ to accelerate image processing.
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
This project creates an FPGA-controlled hexapod robot which is capable of walking and navigating around its environment using sonar and IMU.
Robotics are at the leading edge of Industry 4.0, AI and the Edge revolution. Let's look at how we can create an FPGA-controlled robot arm.
This revisionist's project examines the meanings of being ALIVE and being AWARE based on the Caveman in the Box Theory.