Sending a 2D line drawing to a robot to draw the line
We built a line-following balancing robot that uses computer vision and IR sensors to follow a line and detect obstacles.
A project by a team of students from the Hebei University of Technology
I have developed a fully hardwired Space Invaders written in BSV using the Ultra96 FPGA board.
This device measures the rotational speed of fans and records the difference of temperatures due to variating speeds said fans.
A smart beehive that can keep the beekeeper in the know about everything related to the beehive and to the bees.
Using a TI F28379D Launchpad and a plastic recorder we coded a robot to move. Using WiFi an ESP8266 sent the notes to LABView on a computer.
Chsel is a robot car that searches for various fruits, collects them and delivers them to a home base.
A tone-detecting, line-following, break-dancing robot car!
Breanna Chan and Brenna Kelly's final project for ME 461
This machine, built around a MSP430G2ET, uses a DC motor to deal out a card when motion is detected within 4 inches of an ultrasonic sensor.
Custom shaped PCB with RGB LEDs
This project is the programmer board which is an AVR high voltage programmer (parallel programmer) and a USBtoSerial interface...
This is a step-down transformer, which steps down the ac voltage from 220V to 12V.
I used an Arty S7 and a PMOD accelerometer to work as a mouse pointer
Have you ever thought about how much better and happier your plant would be with the perfect amount of water all the time. Here's how!
The goal for this project is to control the position of a ball on a beam that is actuated by a motor while using 5 LED lights as indicator.
This project involved using an accelerometer chip and an Orange Pi to wirelessly control a small car.
Compute address, wildcard, network address based on IP and subnet mask
Dot detection using webcam
The ultimate lamp.
Transform your doorbell, in these covid times!!!!
Wall riding and obstacle avoiding using IR sensors, bump switches, PI motor control, and T. I Launchpad
Old linear stage + Old HDD case = Modern piece of test equipment