How to get the PYNQ and Matrix Voice to work with each other.
Leveraging FPGA capabilities to design and to implement a Frequency Hopping Spread Spectrum (FHSS) System.
A smart glove that translates sign language letters into written letters with monitor.
Easy to use Platform to learn VHDL. Running on a ZYBO over the web.
GigE Vision camera bridge prototype using the Zybo Z7-10 board with a Digilent Pcam 5C camera connected to it.
AES CryptoCores is a dedicated hardware module which helps for encryption and decryption of data using the desired key.
Optical inspection using OV7670 and Nexys Video.
An assistant for visually impaired people. The user will be notified when he is getting too close to a dangerous object.
Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.
Xilinx Pynq framework allows us to combine Python and programmable logic. Let's look at how we can create a Pynq Image for custom boards.
Robotics are at the leading edge of Industry 4.0, AI and the Edge revolution. Let's look at how we can create an FPGA-controlled robot arm.
This project combines eLua with an open source RISC-V CPU core to a powerful, self-hosted embedded platform for FPGAs.
I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.
Let's write an efficient SRAM controller in Verilog.
Not all imaging systems need to be expensive. Solutions can be created using cost optimized FPGA and CMOS image sensors directly.
This project creates an FPGA-controlled hexapod robot which is capable of walking and navigating around its environment using sonar and IMU.
Part one of a project that will demonstrate the building of an FPGA/SoC-based hexapod robot.
Leveraging HLS functions to create a image processing solution which implements edge detection (Sobel) in programmable logic.
Building on the Zybo Z7 image processing application. This project demonstrates using HLS with C/C++ to accelerate image processing.
In this project, FPGA-based ultrasonic radar screen have been developed, tested and applied. Design is made up of general and basic parts.
Here we demonstrate how to build fundamental CanSat electronics using a Cmod A7 FPGA board.
This project is a medical instrument developed for early detection of dental decay using the electrical impedance measurement method.
A Radar that detects objects with the help of sound waves is going to be implemented. Radar screen will be created on a HDMI screen.
Sweep 'n' Play is a FPGA-based games consoles that offers you a new you way to play from your smartphone or tablet.