As a fun start to 2022, I pulled out the HP vintage bubble displays I bought on eBay with a simple Verilog controller module on the Arty Z7.

RGB and addressable led, can be supplied with 3.3volts. Using these big panels we can make clock and other display devices.

Built on pocketbeagle with python, this bracelet can provide combined effects of vibration and LED while playing music.

hii, friends I hope you all are fine today i'll show you how to Make TV Ambilight Using Arduino This is a very easy project.

Now with 5 exciting modes of operation: music equaliser, 2-player pong, animator, spirit level and voltage display.

Porting Arduboy to SAMD51 MCU and ILI9341 TFT display using Wio Terminal.

I let the internet display messages on my University graduation cap and I did not regret it! Find out how I did it.

This project implements a digital dice roller on Basys3 board using HLS.

Using an example, this project demonstrates the impact of the combinational circuit design in HLS.

A digital clock completely built from scratch without any coding or microcontroller. Just by using only 74xx and 40xx series digital IC.

Lets build a small cute 5*5 RGB LEDMATRIX

RGB LEDs triangular/hexagonal pixels matrix.

This project respects the norms of social distancing. Thus, the owner can communicate with the safe from any distance Great for this period!

Minimalistic Emergency ventilator with fine control over BPM, tidal volume and flow rate, with a digital interface.

Actual PWM duty cycle on 7-segment LED display, driven by hardware (PL) and controlled by software (PS).

Use your hand to control the height of a pixel, and then navigate through a map full of obstacles to avoid. Get to the end to win!

Digitizing household mechanical switches with CoolMOS C7. `

I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.

Monitoring digital circuits can be difficult at best. Sometimes it's nigh impossible. But the Digital Discovery makes it easier!