Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
Responds to sound or can be set on automatic, all by IR. Or switch. WS2812B VU Bar on Uno or Nano. CHECK MY OTHER VU PROJECTS.
Minimalist cars race with a strip of smart LEDs and two switches.
Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
Training board for essential logic gates.
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Leveraging HLS functions to create a image processing solution which implements edge detection (Sobel) in programmable logic.
Not all imaging systems need to be expensive. Solutions can be created using cost optimized FPGA and CMOS image sensors directly.
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely without taking
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.
Building on the Zybo Z7 image processing application. This project demonstrates using HLS with C/C++ to accelerate image processing.
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
This project creates an FPGA-controlled hexapod robot which is capable of walking and navigating around its environment using sonar and IMU.
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
Robotics are at the leading edge of Industry 4.0, AI and the Edge revolution. Let's look at how we can create an FPGA-controlled robot arm.
Find the location of a device, using multiple DWM1000-ESP8266 pairs, and an FPGA.
In this project, we have made an automatic water tap using Arduino and IR sensor to solve the problem of wastage of water in our daily life.
Part one of a project that will demonstrate the building of an FPGA/SoC-based hexapod robot.
Interactive snake enclosure that is temperature and humidity controlled and uses lat-long to mimic natural light cycles, with an online cam.
Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.
A scrolling text display, using 294 LEDs to simulate a stock exchange ticker.
Or connect with your social account:
New here? Create an account