You'll learn how to create an automation system to communicate 3 Arduinos via RS485.
In this tutorial we will learn how to make a simple step counter. This project is very useful in robotics.
A digital thermometer built from scratch using Attiny85 and ds18b20 temperature sensor, which can run on a CR2032 over 130 days!
Mobile station for weather exploration with ATttiny85 and BME280 for your smartphone.
This simple project uses Xilinx Vitis 2020.1 to run an up/down BCD counter on Basys-3 board.
You'll learn how to communicate two Arduinos via RS485.
Application notes for Pmod OLED and Arduino Uno. In this app, a cloud of points is displayed randomly, then a flashing message will appear.
The goal of this project is to demonstrate the capability of HLS in designing a digital clock system.
This mini-project shows how to display a floating-point number on 7-segments using C/C++ HLS.
This project demonstrates the capability of high-level synthesis in describing digital systems by implementing a 0-9 Up/Down counter.
In this project I'll show you how to implement a BCD decoder on the BASYS 3 using the switches and the 7 segments display on the board.
Application notes for Pmod OLEDrgb and Arduino Uno. In this app, we will setup a message to display in different sizes and colors.
In this app, keys pressed on Pmod KYPD will be shown on the LCD.
Application notes for Pmod TMP2 and Pmod CLS. In this app, the ambient temperature is displayed on the serial monitor and serial LCD.
I decided to build a laser gun to compete with my friends a little. As I decided I did.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Real-time pixels to LED display.
A simple tutorial and setup for this multi-function module, with a built-in thermostat, humidity sensor, clock and alarm feature.
This project uses an LCD screen and DHT22 to display temperature and humidity data, simultaneously collected from two different locations.
Use an RGB matrix and a micro:bit to display the time with an awesome game of PONG. Made with love and TinyGo.
This project proposes the creation of a graphics library in order to generate and manipulate the graphic information only using VHDL.
Application notes for Pmod CLS and Arduino Uno. In this app, the message sent from the serial monitor will be displayed on the Pmod LCD.
Application notes for Pmod SSD and Arduino Uno. In this app, Pmod SSD will be used as a counter that increments every second.
Application notes for Pmod CLP and Arduino Uno. In this app, the Pmod will be programmed to display text on the LCD.