How to use the MiniZed with the Vitis embedded flow for motor control applications.
Home Security at the touch of your fingers! Get notifications when your house door is opened.
We take a look at a very interesting GitHub repository that enables video recording on the ESP32-CAM board.
Because LED are fun - but addressable rocks. :)
When the reset button is pressed, the board will take an image, store it to the microSD card and it will then go back to deep sleep.
Remote Controlling a laser through the use of multiple argons.
This project uses an LCD screen and DHT22 to display temperature and humidity data, simultaneously collected from two different locations.
FPGA based binary clock, which uses GPS for the time reference.
ESP32 + HTTP server + WebSockets + Bootstrap + Husarnet + configuration and HTML files on SD card.
This is the 2nd tutorial on my ESP32 learning journey. Here, an OLED shows time and captured data by DHT sensor (temperature & humidity).
The ability to process, manipulate and otherwise work with audio signals is a key feature of DSP in FPGA. Here's a look at how we do this!
Come forward to meet the speaking mailbox.
How to connect A6 GSM GPRS module with Arduino and also work with “AT” commands.
The Cortex-M1 is ideal for implementations in low-cost FPGA Spartan 7 devices. Let's look at an example project.
A thermostat with an OLED capable of plugging into a USB port.
This is a PIR sensor-based automatic lamp switch.
This project is a GPS tracking system with LCD display using an Arduino Uno and a Digilent PmodGPS.
Pet feeder is for people who live with pet(s) to help them feed their pets when they are not at home.
Build a weather station with Arduino & ASP.NET Core.
RGB LED backlight with audio signal visualization for room/desk backlightning...
Light up three different LEDs using pulse width modulation corresponding to different ranges of analog input voltages.
When my ultrasound sensor stopped working, I decided to improvise by making an obstacle avoidance bot using IR sensors (cheaper too).
A cheap DIY version of Nanoleaf RGB LIGHT with ATtiny85 and WS2812 RGB strip.
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.