In this tutorial we will use stepper driver A4988, NEMA17 stepper motor, Arduino Uno and Visuino to run a stepper motor.
In this Project we will learn how easy it is to control a Linear Actuator with Arduino using a Capacitive touch button and Visuino.
FPGA are ideal for precision motor control, in this project we are going to create a simple motor control application which we can build on.
Will show you how to use AD2 to debug the UART protocol.
This project walks through how to create an embedded Linux image for the Arty-Z7 using PetaLinux 2022.1
This project walks through no-OS development from hardware through to C code on the Zynq-based Arty-Z7 FPGA development board.
A discussion about digital sound synthesis.
Exploring the signals behind Arduino's Servo library, and characterizing a servo's response to pulse width.
Application notes for Pmod CMPS2 and Arduino Uno. The 3 components of the magnetic field, module, & angle are displayed in serial monitor
How to make DIY Fingerprint Door lock System using r307 fingerprint module
I built the right and left mouse buttons with wall switches.
How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
In this project I will show you how to create a custom AXI IP on Vitis, and the driver to manage it from Bare-Metal and Petalinux.
Application notes for Pmod TC1 and Arduino Uno. In this app, the temperature value is displayed on the serial monitor.
Application notes for Pmod MIC3 and Arduino Uno. In this app, the sound captured by the module is displayed in the serial plotter.
This project will go trough the process of acquiring an input signal through the Zmod ADC and re-creating the signal through the Zmod DAC.
An R/C servo can be used to make a gauge to measure the intensity of light.
See how to use the Zmod AWG DAC converter with the Eclypse Z7 FPGA board using Vivado 2021.2.
I will show you how to control the movemovent of a stepper motor using the Azure Sphere MT3620 device
Add Sensors and device control quickly and easily to LabView without having to add any drivers!
Basics on how to set up Zigbee using XCTU.
Guide to use esp8266 flash memory and Little File system using using Arduino IDE. This guide covers how to read, write and delete data.
Review of the "ELEGOO Mega 2560 The Most Complete Starter Kit Compatible With Arduino IDE". Starter kit with more than 200pcs components
This project demonstrates how easy you can use the DMMShield from Digilent with all Arduino boards.