The ability to process, manipulate and otherwise work with audio signals is a key feature of DSP in FPGA. Here's a look at how we do this!
The Cortex-M1 is ideal for implementations in low-cost FPGA Spartan 7 devices. Let's look at an example project.
See how to bring up Xilinx's soft-processor implementation, the MicroBlaze, on the Arty-A7 board.
How to control motors using PWM, the MiniZed and a touchscreen controller.
FPGA based binary clock, which uses GPS for the time reference.
This project proposes the creation of a graphics library in order to generate and manipulate the graphic information only using VHDL.
This project implements a UART transmit logic design in HLS.
Builds on the project Mini But Mightyu, the MiniZed and Vitis for Motor Control using the built in accelerometer to control the speed.
This project demonstrates the capability of high-level synthesis in describing digital systems by implementing a 0-9 Up/Down counter.
The goal of this project is to demonstrate the capability of HLS in designing a digital clock system.
This mini-project shows how to display a floating-point number on 7-segments using C/C++ HLS.
Python-powered edge analytics and machine learning for electric drives.
Connect your FPGA project to a wireless network and get information about your system while on the network.
PLC with an HMI operator panel. System is able to be used with real automation objects. Showcased on miniaturized, fully-functional models.
This project will go trough the process of acquiring an input signal through the Zmod ADC and re-creating the signal through the Zmod DAC.
This simple project uses Xilinx Vitis 2020.1 to run an up/down BCD counter on Basys-3 board.
A tutorial on creating an UART interface between the Basys 3 board and the computer terminal in VHDL running on FPGA.
In this project I will show you how to create a custom AXI IP on Vitis, and the driver to manage it from Bare-Metal and Petalinux.
Control MM10 motor using MiniZed's onboard accelerometer
In this project I'll show you how to implement a BCD decoder on the BASYS 3 using the switches and the 7 segments display on the board.