Dan's summer house has plants he likes to water, using a MiniZed we can monitor humidity and temperature to determine if they need watering.
Full procedure with theory explaining the concept behind a line follower robot
In this tutorial I will show you how to make gas leak alert security alarm using arduino nano and mq 5 gas sensor
Night lamp using LDR
Hii Friends Today I'll Show You How To Make Simple DIY Eclipse Wall Light Using ESP8266 SO LET'S Make It🔥
Wireless wearable device to control if there is a safe distance between you and the flow of people around you.
Multipurpose dispenser made from components of water purifier, scrap & hardware to use either soap+water or sanitiser dispensing
In Malaysia, we are under recovery Movement Constraint Order phase and social distancing compliance is very important at very least 1 meter
I decided to build a laser gun to compete with my friends a little. As I decided I did.
A security system, with motion detection, based on a raspberry pi 3 model B and an usb webcam.
See how to bring up Xilinx's soft-processor implementation, the MicroBlaze, on the Arty-A7 board.
Initial project for the concept to prototype using the Ultra96V2. This project creates a MIPI image processing pipeline using baremetal
How to make a Otto Diy Dancing Robot. This is the world's first Otto robot without 3D printer and Arduino.
How to control LED RGB WS2812B (Neo Pixel/ Addressable LED) using Arduino, Bluetooth Modul HC05 and and Android Application made by MIT APP
Collecting large data sets is key to applied data science. Use the techniques in this project to collect data on your BBC micro:bit.
Large shops used staff to limit customer entry during lockdown. Small shops which don't have extra staff, can use this solution.
Build your own line following robot (line follower) step by step easily by following this tutorial
How to build a remote controlled car toys using Arduino and Bluetooth Modul HC-05
Ultimate getting started guide to easily understand how stepper motor work and how to properly control using an Arduino board
A general purpose wireless I/O board using a Particle Photon. Control a small motor, solenoid, servo, external loads, buzzer and sensors.
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
Real-time pixels to LED display.
LED indicators to show Dark or Light Level
I hate disturbance - so a color LED shows my Outlook calendar status to my colleagues or family, and gives them a warning ;-)