Do you want to realize a co-simulation on System Generator using NexysA7? Oops! Nexys A7 is not available 🤭 Let's add it ❤️
See how to use the Zmod AWG DAC converter with the Eclypse Z7 FPGA board using Vivado 2021.2.
Learn to work with stepper motors online! You can use the Wokwi Embedded systems simulator to simulate several boards online and learn! 😍
This project walks through basic RF testing for hardware/software verification of SDRs on the Ettus B205mini USRP.
Learn to use Liquid Crystal Display with Arduino using a free Arduino Simulator 👍 No Hardware Necessary
Analysis using Red Pitaya STEMlab 125-10 Starter Kit
Review of the "ELEGOO Mega 2560 The Most Complete Starter Kit Compatible With Arduino IDE". Starter kit with more than 200pcs components
Basics on how to set up Zigbee using XCTU.
In this tutorial we will learn how to rotate a stepper motor for a certain time period and then with a push of a button repeat it again.
Add Sensors and device control quickly and easily to LabView without having to add any drivers!
This is an introduction into LabVIEW 2014 and the basics on how to get started making a project, building your own VIs and more
This is a robot car design based on myRIO
Guide to use esp8266 flash memory and Little File system using using Arduino IDE. This guide covers how to read, write and delete data.
This article is about how to detect a Karman Scroll Airflow Sensor.
In this project the ADP3450 Oscilloscope/Function Generator/Logic Analyzer has been used to analyze various signals.
How to make DIY Fingerprint Door lock System using r307 fingerprint module
I created this small Christmas Village for my little monster.
In this tutorial we will learn how to make a simple step counter. This project is very useful in robotics.
This project will go trough the process of acquiring an input signal through the Zmod ADC and re-creating the signal through the Zmod DAC.
Connect led with Arduino to run the blinking program
This mini-project shows how to display a floating-point number on 7-segments using C/C++ HLS.
In this project I'll show you how to implement a BCD decoder on the BASYS 3 using the switches and the 7 segments display on the board.
In this project I will show you how to create a custom AXI IP on Vitis, and the driver to manage it from Bare-Metal and Petalinux.
This sensor is good for smart parking