Hello Friends, In this video How to use IR sensor with Arduino? (With full code)

Set up an RGB LED to phase through the colors of the rainbow, or use twist knobs to make a custom color.

Automatically turn on the humidifier when the environment humidity is below 50%.

I wasn't happy with the way the square waves sound, so I explored using other methods of generating sound waves with Arduino.

DigiSpark ATtiny85 I2C connected to a tiny OLED (128x32 pixels) can show easily readable, huge fonts (16x32 pixels WxH)!

Using an Arduino to toggle something like an LED light is simple in theory, but buttons don't always behave the way we think.

Another metaphoric machine that does nothing—absolutely nothing—except switching itself off.

This is a low cost robot that will help students in better learning and understanding.

Application notes for Pmod OLEDrgb and Arduino Uno. In this app, we will setup a message to display in different sizes and colors.

Interface with a microcontroller from a web browser, using HTTPS and a simple Python server.

Application notes for Pmod AD5 and Arduino Uno. The result of the A/D conversion of the AIN1 channel is displayed on the serial monitor.

The HDrive is an easy to use IoT-enabled servo drive, both for the inexperienced and for professionals.

In this app, keys pressed on Pmod KYPD will be shown on the LCD.

Application notes for Pmod OLED and Arduino Uno. In this app, a cloud of points is displayed randomly, then a flashing message will appear.

Application notes for Pmod GYRO and Arduino Uno. In this app, 3 components (x, y, z) of the gyroscope are displayed in the serial monitor.

Want to register at what time your employees arrive and leave? With Arduino MKRZero and RFID is easy to do so.

A simple guessing game using the Arty development board and a terminal emulator.

Application notes for Pmod ISNS20, Pmod SSR and Arduino Uno. In this app, the value of the sensed current is displayed on the serial monitor

Application notes for Pmod ACL and Arduino Uno. The 3 components, X, Y & Z, of the accelerometer are displayed in the serial monitor.

Application notes for Pmod DPOT and Arduino Uno. In this app, the output voltage will go from 0 to 5 V, changing every second.

This tutorial describes the process of setting up a Raspberry Pi as a LabVIEW target using LINX.

Application notes for Pmod CLS and Arduino Uno. In this app, the message sent from the serial monitor will be displayed on the Pmod LCD.

Application notes for Pmod ACL2 and Arduino Uno. The 3 components (X, Y, Z) of the acceleration are displayed in the serial monitor.

Application notes for Pmod DA4 and Arduino Uno. In this app, the ourput voltage A to E ranges from 2.5 V to 0.5 V in increments of 0.5 V.