ESP32 + HTTP server + WebSockets + Bootstrap + Husarnet + configuration and HTML files on SD card.
This is the start of a new series where we learn how to build a dashcam using the Raspberry Pi Zero.
This is the first post in a new mini-series, where we build a home surveillance system, mainly using Raspberry Pis.
In this post, we will learn how to install Home Assistant on the Raspberry Pi and we will also learn how to view the ESP32-CAM steam.
We take a look at a very interesting GitHub repository that enables video recording on the ESP32-CAM board.
In this post, we are going to look at 3 different methods by which you can remotely access the Raspberry Pi.
In part 3 of this series, we evaluate NVR options for both the Raspberry Pi and for a Windows PC.
This post will show you how you can build a simple time-lapse camera using a Raspberry Pi.
We will obtain and display the video feeds from two network cameras we built previously.
When the reset button is pressed, the board will take an image, store it to the microSD card and it will then go back to deep sleep.
Raspberry Pi can be a good environmental monitor and can forbid you to drive if you're drunk.
We install OpenCV, write test scripts to capture an image and also carry out colour separation using OpenCV.
Want to register at what time your employees arrive and leave? With Arduino MKRZero and RFID is easy to do so.
Use this project to get started on your first Pynq design using the Pmod Hygro to monitor the temperature and humidity of your environment!
Collecting large data sets is key to applied data science. Use the techniques in this project to collect data on your BBC micro:bit.
A security system, with motion detection, based on a raspberry pi 3 model B and an usb webcam.