The Cortex-M1 is ideal for implementations in low-cost FPGA Spartan 7 devices. Let's look at an example project.
The ability to process, manipulate and otherwise work with audio signals is a key feature of DSP in FPGA. Here's a look at how we do this!
An automated pigeon repellent using Texas Instruments MSP-EXP430G2 MSP430 LaunchPad, 2 IR sensors, 2 RC servos, and a pepper spray.
In the hydroponic farming industry, a method of growing is referred to as ebb and flow. Our project automates this task.
A virtual reality system using a similar device to Google Cardboard, a compatible phone and a lot of cables.
A cheap DIY version of Nanoleaf RGB LIGHT with ATtiny85 and WS2812 RGB strip.
Translate music to a dazzling light show with this customizable light controller project. Great for DJs, parties, and 1:1 shows!
Diversity Adaptive Obstacle Avoiding Robot
The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
This is the 2nd tutorial on my ESP32 learning journey. Here, an OLED shows time and captured data by DHT sensor (temperature & humidity).
You want to attach the DigiSpark ATtiny85 to a tiny OLED (128x32 pixels) and make it use easily readable, huge fonts (16x32 pixels WxH)?
Exploring the signals behind Arduino's Servo library, and characterizing a servo's response to pulse width.
we performed the control of the stepper motor in the forward and backward directions along the x axis with the joystick
I wasn't happy with the way the square waves sound, so I explored using other methods of generating sound waves with Arduino.
A discussion about digital sound synthesis.
The HDrive is an easy to use IoT-enabled servo drive, both for the inexperienced and for professionals.
I built the right and left mouse buttons with wall switches.
How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
Automatically turn on the humidifier when the environment humidity is below 50%.
Application notes for Pmod CMPS2 and Arduino Uno. The 3 components of the magnetic field, module, & angle are displayed in serial monitor
An R/C servo can be used to make a gauge to measure the intensity of light.
This project is a GPS tracking system with LCD display using an Arduino Uno and a Digilent PmodGPS.
Pet feeder is for people who live with pet(s) to help them feed their pets when they are not at home.
This library allows an Arduino to easily display numbers and characters on a 4 digit 7-segment display without a separate 7-segment display.
Or connect with your social account:
New here? Create an account