Set up an RGB LED to phase through the colors of the rainbow, or use twist knobs to make a custom color.
Arduino boards don't have analog outputs. But they do have a function called analogWrite. So what is it doing there?
Using an Arduino to toggle something like an LED light is simple in theory, but buttons don't always behave the way we think.
In this guide, I will show how to measure harmonics in signal with Analog Discovery 2 using FFT contained in Digilent WaveForms.
A simple calculator that operates on dozenal (base-12) numbers.
Characterizing button switching behavior is an important first step for developing effective debounce algorithms in your systems.
I made an RC car to use with a Bluetooth module.
Interface with a microcontroller from a web browser, using HTTPS and a simple Python server.
Connect your FPGA project to a wireless network and get information about your system while on the network.
Spectrum Analyzer using Zybo Z7 board, PMOD AD2 and Processing v3.x for displaying the spectral lines.
This project proposes the creation of a graphics library in order to generate and manipulate the graphic information only using VHDL.
Diversity Adaptive Obstacle Avoiding Robot
I have created a graphical user interface for LIRC that allow you to control you Raspberry Pi universal remote with LabVIEW.
An introduction to LINX 3.0 which adds the ability to deploy LabVIEW code to run on BeagleBone Black and Raspberry Pi 2 and 3.
Automatically turn on the humidifier when the environment humidity is below 50%.
we performed the control of the stepper motor in the forward and backward directions along the x axis with the joystick
This library allows an Arduino to easily display numbers and characters on a 4 digit 7-segment display without a separate 7-segment display.
You want to attach the DigiSpark ATtiny85 to a tiny OLED (128x32 pixels) and make it use easily readable, huge fonts (16x32 pixels WxH)?
How to flash MicroPython on a Sonoff Smart Switch to prepare for communication with Cloud4RPi service.
This exercise will show you how to use your OpenScope MZ to read the output of a first order RC circuit.
This exercise will show you how to use your Analog Discovery 2 to verify what the signal looks like from an Arduino PWM pin in LabVIEW.
Winter is coming, which makes this the perfect time for a spectacular indoor craft project!
A generic setup for museum exhibit automation. DFRobot 4 relay shield 2.1 and screw shields, Hitachi 16*2 Display shield on UNO or Mega.
Application notes for Pmod HYGRO and Arduino Uno. In this app, temperature and humidity values will be displayed on the serial monitor.
Or connect with your social account:
New here? Create an account